Clinch River Swayback Genuine Stag (RoseCraft Blades)

Clinch River Swayback Genuine Stag (RoseCraft Blades)

$74.99
Skip to product information
Clinch River Swayback Genuine Stag (RoseCraft Blades)

Clinch River Swayback Genuine Stag (RoseCraft Blades)

$74.99
Shipping calculated at checkout.
Details

The RoseCraft Blades Clinch River Swayback Stag is based on the popular traditional Swayback pattern but offers a finger choil that is cut partly from the blade and partly from the bolster. This one-bladed slip joint features a 3.125” D2 Steel Wharncliffe blade with a half stop and a brushed satin finish. The covers are Genuine Red Deer Stag with steel liners, nickel silver pins, and brushed steel bolsters. It’s 4” closed and 7.125” fully open. Original pattern design by Andy Armstrong.

Please Note: Our Genuine Stag is a natural material derived from Red Deer Stag. Each piece is unique and has different characteristics. The images shown on this page show several examples of how Genuine Stag appears on this pattern. Your knife will look different – unique and carry weight may vary slightly.

Safety + Care

SlipJoint Knife Safety (Short Version) 

  • NEVER try to catch a knife with an exposed blade. 
  • Don’t pierce anything, especially with pressure.  Slip joint knives don’t lock open.  Piercing cuts are a great way to have the knife fold over on your fingers. 
  • Open and close carefully with two hands, keeping fingers out of the blade’s path. 
  • Make sure the blade is fully open before using it — slip joints do not lock. 
  • Do not pry, twist, or force the blade. 
  • Always cut away from your body and keep your other hand clear. 
  • If the blade binds or sticks, stop to avoid accidental closure. 
  • Carry the knife closed in a dedicated pocket or slip. Lightly oil the pivot periodically.  
  • Don’t use the knife if knife feels loose, gritty, or unstable. Stop use until it is cleaned or inspected. 
  • Keep it clean, dry.   
  • Avoid using the knife when distracted or tired. Take extra care if you do use it. 
  • Store closed and out of reach of children. 

Slip-Joint Knife Care 

Either carry the knife in a slip or carry in a pocket by itself – no keys, coins, etc… 

  • Keep it clean & dry.  Lightly oil the pivot periodically. Mineral oil works very nicely.  No need for specialty oil. 
  • Don’t use the knife as a screw driver, pry bar, etc…. It is only for making cuts. 
  • We at Hendrix Classics & Co. provide three years of free sharpening services – you only payfor shipping.  We will send you a discounted shipping label. 
  • Store the knife closed, clean, and dry. 
  • Avoid leaving the knife in damp environments that can weaken springs or cause rust. 

Read more here. 

Shipping + Refunds

Refer to the following pages:

Shipping Policy

Refund Policy

You might also like...